铁钢 - 進出口

切割泵 切割泵系列 SXC 能够处理低合金钢，加工钢和铸铁/铝混合物。屑可以是块屑或团屑。屑必须传送到泵的吸入口。搅拌器可以拾起屑，并打碎。如有需要，由泵切碎并抽送。 SXC系列泵配备了方便用户的45度法兰，接口允许水平及垂直管路，带压力表接口G 1/4。 更多信息，请参考技术信息的提升泵特征SXC/SPC部分。 叶轮: 轴向 / 半开式叶轮是此系列泵的特点。 液体: 冷却液, 乳化液, 油 (根据需求) 流量: 最大 1000 l/min 扬程: 最高 20 m BRINKMANN PUMPS 有着60年的经验，提供高技术的各种系列冷却泵，应用在不同行业。主要应用在机床行业。其他应用如印刷行业，塑料行业和饮料行业。 作为一个独立的家族企业，员工大约300名，BRINKMANN PUMPS 关注客户和用户的需求。我们的优势是反应快，尤其是在产品开发上，满足所有性能，效率和寿命上的需求。样机非常迅速和经济，我们使用最新的生产技术，批量生产。 我们的总部在德国，全球各地有经销商，在美国和日本有分公司，技术和想法来自于 BRINKMANN PUMPS 销售给全世界。

Weight: 3~20T Applicable device: mill parts Application: Cement, electricity, metallurgy, chemical and others Customizable: Yes Product Introduction Bearing chock plays an important role of fixing bearing and bearing weight. It is the core part of rolling bearing. Its main function is to support the whole bearing structure. Bearing chock works under low speed and heavy load for long time. So its reliability is the most important feature. To achieve this feature, it must require good quality of bearing chock.

In the metallurgical and melting fields, a ladle is a vessel used to transport high temperature metal or pour out molten metals. Usually it has three different types, for example, casting ladle, transfer ladle, treatment ladle. Ladles are normally rated by their working capacity rather than by their physical size. Casting ladle: a ladle used to pour molten metal into moulds to produce the casting. Transfer ladle: a ladle used to transfer a large amount of molten metal from one process to another. Typically a transfer ladle will be used to transfer molten metal from a primary melting furnace to either an holding furnace or an auto-pour unit. Treatment ladle: a ladle used for a process to take place within the ladle to change some aspect of the molten metal. A typical example being to convert cast iron to ductile iron by the addition of various elements into the ladle.

Crucibles are cast steel molds for the casting of aluminum ingot for remelt storage and/ or transportation. Dimensions and design can be customized to customer requirements, including the casting of customer’s logo, and additional of feet and/or lugs for material handling. INDUSTRIES : Cast houses; Remelter APPLICATIONS : Cast ingot Solid storage/ transportation Empty trough / furnace MATERIAL AVAILABLE : QT450-12/ASTM A536/65-45-12 Shanghai Special Metal Co., Ltd is a comprehensive and professional supporting supplier in industrial field which owns great production capacity, advanced management ability, splendid procedure control system and first rate service so that we can provide high quality products as well as service to the worldwide customers. In principle there are three sorts of materials available for the manufacture of crucibles: Grey Cast Iron, Spheroidal Graphite (S.G.) Iron and Cast Steel.

Aluminum electrolyzer is the main equipment of Cryolite- Aluminum Oxide mix in the fused salt solution in order to electrolysis the fine aluminum to get the aluminum ingot. Electrolytic aluminum anode steel claw/yoke is also called electrolysis claw/yoke. There are several types of claws, such as parallel three claws, four claws, stereoscopic four claws, six claws, eight claws, double anode steel claw etc. The steel claw is connected to the copper bar to consist of Anode. Material for the claw/yoke is an approved low carbon steel, which is similar the following standards: AS 2074-2003 Grade C2 AISI 1010, 1008 or 1006

紧凑型直线光栅尺的安装尺寸相同。也就 是说对一定机床结构，可以互换LS或LF系 列增量式直线光栅尺与LC绝对式直线光栅 尺（请注意LF的测量长度比LC和LS小 20 µm）。此外，该类直线光栅尺产品线 使用的安装板相同（LC，LF或LS）。 安装直线光栅尺时，必须确保密封条朝下 或远离溅水方向（参见一般机械信息）。 热特性 由于用两个M8螺栓刚性连接，因此直线光 栅尺本身能很好适应安装面。用安装板固 定时，直线光栅尺在中点位置处固定至安 装面。柔性固定件确保光栅尺有可重现的 温度特性。 LF 485的光栅尺基体是钢材，其热膨胀系 数与灰口铸铁或钢材的安装面热膨胀系数 相同。 安装 安装海德汉封闭式直线光栅尺非常简单： 只需将光栅尺的多点对正机床导轨。也可 用限位面或定位销对正光栅尺。安装辅件 已将光栅尺与读数头间的间隙以及横向公 差调整正确。如果安装空间有限，安装光 栅尺前必须先拆下安装辅件，然后用安装 量规方便地和准确地调整光栅尺与读数头 间的间隙。也必须确保横向公差。

[Product Description] X-PRO series is for milling carbon steel, low alloy steel and cast iron. It is optimized for roughing by applying a new shape cutting edge for reducing cutting force and improving wear resistance. [Product Specification] Flat end mill : D3 ~ D16 (2Flute, 4Flute) Roughing end mill : D3 ~ D16 (3Flute, 4Flute) [Product Model] Flat : 2XPE, 4XPE, 4XREV, 4XPEV Roughing : 3XOE, 4XOE [Product Use] * X pro series is suitable for Roughing by chip breaker and to cut HRC below 50. * Strong wear-resistance by adapting X-pro coating. * Special design of cutting edge minimizes fracturing. * Excellent work surface by deep ship pocket.