碳钢 - 進出口

除了SPIROL标准公制直槽弹性销外，SPIROL还根据市场需求推出了一系列ISO 8752直槽销。SPIROL可提供符合ISO 8752规格高碳钢和奥氏体不锈钢直槽弹性圆柱销，均为本色表面，直径从2毫米至12毫米不等。 ISO 8752直槽销无镀锌或钝化等额外涂层，因为它们在整饰过程中容易发生互锁。

SPIROL的KP200直滚花销在整个长度方向带有直滚花。直滚花销通常用于销承受旋转力以传递扭矩，同时抵抗配合组件旋转运动的应用场景。KP200直滚花销采用低碳钢和奥氏体不锈钢制成，涵盖从2.5毫米到6毫米的公制直径和从0.094英寸（3/32）到0.250英寸（1/4）的英制直径。

SPIROL的FH200带头直滚花销与KP200直滚花销主体型式相同，但增加了一个头部。带头销通常用作正向挡块，或者用于将组件中的较薄部件固定于较厚部件上。FH200带头直滚花销通常为平头设计，但是，为满足特定应用要求，客户也可要求订购圆头（RH200）销。与SPIROL的KP200直滚花销产品类似，SPIROL的FH200直滚花销采用低碳钢和奥氏体不锈钢制成，型号涵盖从2.5到毫米6毫米的公制直径和从0.094英寸（3/32）到0.250英寸（1/4）的英制直径。

SPIROL的FH400带头倒钩销在整个长度方向带有一系列倒钩。带头倒钩销是塑料组件中自攻螺钉的理想替代品，因为倒钩销安装在标准模制孔（或钻孔）中，安装速度比螺钉快得多，安装过程中也完全不存在螺纹咬扣或歪斜相关的问题。另外，螺钉是拧紧到预设扭矩来防止后退（或松动），而倒钩销的固位是通过塑料回填在主动设计的倒钩上实现的。销头可以作为正向挡块，也用于将组件中的较薄部件固位在较厚部件上。SPIROL的FH400带头倒钩销由低碳钢和奥氏体不锈钢制成，涵盖从2到6毫米的公制直径和从0.78英寸（5/64）到0.250英寸（1/4）的英制直径。

SPIROL的KP300螺旋滚花销在整个长度方向带有螺旋滚花。在将销装入孔的过程中，30°的螺旋滚花设计使得销可在孔中自由旋转。螺旋滚花销比直滚花销的插入力和固位力更大。但如果销要承受旋转力，通常不建议使用KP300螺旋滚花销，因为螺旋滚花可能导致销与孔分离，或者嵌入过深。KP300螺旋滚花销采用低碳钢和奥氏体不锈钢制成，涵盖从2毫米到6毫米的公制直径和0.078英寸（5/64）至0.250英寸（1/4）的英制直径。

SPIROL的FH300螺旋滚花销与KP300螺旋滚花销销身型式相同，但增加了一个头部。带头销通常用作正向挡块，或者用于将组件中的较薄部件固定于较厚部件上。FH300带头螺旋滚花销通常为平头设计，但是，为满足特定应用要求，客户也可要求订购圆头（RH300）销。与SPIROL系列KP300螺旋滚花销产品类似，SPIROL的FH300带头螺旋滚花销由低碳钢和奥氏体不锈钢制成，型号涵盖从2到6毫米的公制直径和从0.078英寸（5/64）到0.250英寸（1/4）的英制直径。

SPIROL的重型抗疲劳卷制弹性圆柱销直径从1.5毫米（0.062英寸）到20毫米（0.750英寸）不等。标准材料包括高碳钢、302/304含镍（奥氏体）不锈钢和420含铬（马氏体）不锈钢。直径大于12毫米（0.500英寸）的采用6150合金钢制造。 SPIROL于1948年发明了卷制弹性圆柱销。卷制圆柱销有轻型、标准型和重型可供选择，用以匹配每种应用所需的强度和弹性。相对于施加的载荷，如果销强度过高，可能会缺乏弹性，最终导致孔受损坏；而如果销弹性过高，则可能导致组件出现提前疲劳。卷制圆柱销能够实现强度、弹性和直径之间的理想平衡，进而延长组件的使用寿命。

DIN EN 16983碟形弹簧 碟形弹簧是一种承担轴向载荷的锥形精密组件。碟形弹簧经常被错误地称为贝氏碟形弹簧、贝氏弹簧、贝氏垫圈或锥形垫圈。SPIROL可提供全系列的DIN EN 16983（原DIN 2093）A系列、B系列和C系列1型和2型碟形弹簧。除DIN指定尺寸外，SPIROL还可提供外径从8毫米到200毫米的标准尺寸碟形弹簧。SPIROL标准碟形弹簧是根据DIN EN 16984（原DIN 2092）的标准化计算设计的，符合DIN EN 16983（原DIN 2093）中规定的所有材料、尺寸公差和质量规格。此外，还对DIN标准中没有的直径和厚度组合进行了扩展。标准材料包括碳钢和合金钢，都涂有磷酸锌和油的保护涂层。 除单个碟形弹簧外，SPIROL还可提供预先组合碟形弹簧，采用带有孔标签的收缩膜包装的自定义配置，便于组装。

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

[Product Description] X-PRO series is for milling carbon steel, low alloy steel and cast iron. It is optimized for roughing by applying a new shape cutting edge for reducing cutting force and improving wear resistance. [Product Specification] Flat end mill : D3 ~ D16 (2Flute, 4Flute) Roughing end mill : D3 ~ D16 (3Flute, 4Flute) [Product Model] Flat : 2XPE, 4XPE, 4XREV, 4XPEV Roughing : 3XOE, 4XOE [Product Use] * X pro series is suitable for Roughing by chip breaker and to cut HRC below 50. * Strong wear-resistance by adapting X-pro coating. * Special design of cutting edge minimizes fracturing. * Excellent work surface by deep ship pocket.