墨 - 進出口

高密度，非常坚固 大孔隙，便于完全排水 通过其突出颗粒防滑性能好 耐金属切割 使用寿命长色彩: 黑色 – 其他颜色可要订制

备件包括腔体、灯丝、电弧缝、支架和许多其他部件。这些零备件由石墨、钼、钨和合金制成。它们经久耐用，使用寿命长，因此可以节省资金和维修时间。每个光束路径上都有上百或更多的攀时组件在工作。它们确保有效生成离子，并沿着光束路径不含杂质精确引导到晶片。 对于半导体行业的客户，攀时的备件渐渐已经不仅仅是备品，而是成为了首选。攀时在设备制造商原始备件的基础上优化了几何形状和材料组成。给您带来的好处：简化组件的安装和拆卸、延长使用寿命、降低清洁成本、减少维护工作、减少停机时间。

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层