刀刃 - 進出口

新一代刀头保护帽 —— 装配灵活，轻便，每个规格的保护帽都能适合多个刀刃直径 适用于直径从3mm到30mm的刀具 单一规格保护帽可最大限度地适用于多种直径的刀具保护要求 柔性材料，便于组装、拆卸，而且不伤刀刃

铣刀包装箱， 坚固耐用，为高品质铣刀头提供全方位保护 中心固定旋钮有效地保护刀刃 坚固耐用的双层吹塑箱体 盖底设计便于安全叠放

海德汉公司的测头广泛应用于机床，特别 是铣床和加工中心。使用测头可以缩短设 置时间，增加机床工作时间和提高成品工 件的尺寸精度。可手动设置、测量和监 测，也可以用大多数CNC数控系统的程序 控制执行。 刀具测量 大批量生产取得成功的关键是避免废品或 避免修复加工和保持工艺状态稳定。刀具 是其关键因素。如果刀具磨损或刀具破损 情况未被及时发现，特别是无人值守加工 时未被及时发现将导致零件损坏和不必要 的成本增加。因此，准确测量刀具尺寸和 定期检查磨损情况必不可少。对于机内刀 具测量，海德汉公司提供TT系列触发式测 头和TL系列激光测量系统。持续保持高精度加工必然要求刀具测量数 据准确和定期检测刀具磨损情况。 TT触发式测头的触盘在偏离自由位置时向 NC数控系统发出触发信号，可在刀具静止 时或转动时测量刀具。 TT系列 刀具测头可在机床中测量几乎任何类型的 刀具。可用于测力铣刀长度和直径，包括 各刀刃尺寸。CNC系统将测量结果自动保 存在刀具存储器中，使其用于零件程序。 TT系列测头的刀具测量 方形触盘也能测量旋转的刀具和检查其是 否破损。为了有效补偿刀尖半径，只需在 CNC数控系统中增加一条铣刀半径信息。

[Product Description] X-PRO series is for milling carbon steel, low alloy steel and cast iron. It is optimized for roughing by applying a new shape cutting edge for reducing cutting force and improving wear resistance. [Product Specification] Flat end mill : D3 ~ D16 (2Flute, 4Flute) Roughing end mill : D3 ~ D16 (3Flute, 4Flute) [Product Model] Flat : 2XPE, 4XPE, 4XREV, 4XPEV Roughing : 3XOE, 4XOE [Product Use] * X pro series is suitable for Roughing by chip breaker and to cut HRC below 50. * Strong wear-resistance by adapting X-pro coating. * Special design of cutting edge minimizes fracturing. * Excellent work surface by deep ship pocket.

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

[Product Description] AL-PRO series end mill is optimized to cut Aluminium(AL60, AL 70 line). Various cutting length & total length, customized machining is possible. [Product Specification] Flat end mill : D0.5 ~ D25 (1Flute, 2Flute, 2Flute) [Product Model] Flat : 1ALE, 2ALE, 3ALE [Product Use] * End mills for Aluminum, Alloy, non-ferrous and non-metallic materials

[Product Description] AL-PRO series end mill is optimized to cut Aluminium(AL60, AL 70 line). Various cutting length & total length, customized machining is possible. [Product Specification] Flat end mill : D0.5 ~ D25 (1Flute, 2Flute, 2Flute) [Product Model] Flat : 1ALE, 2ALE, 3ALE [Product Use] * End mills for Aluminum, Alloy, non-ferrous and non-metallic materials

[Product Description] S-PRO series is mainly used for cutting difficult-to-cut materials such as stainless, titanium, nickel and hastelloy in the aerospace field. A deep chip evacuation space of the S-PRO helps to cut difficult-to-cut materials, which facilitates chip evacuation and provides excellent surface finish. [Product Specification] Flat end mill : D1 ~ D20 Ball end mill : D3 ~ D20 C/R end mill : D1 ~ D20 [Product Model] Flat : 4SUE, 4SUEA Ball : 4SUB C/R : 4SUR, 4SURA [Product Use] * The cutting edge type of S pro series is unequal flute and it is suitable for cutting difficult to cut materials like alloly steels, stainless steels, Titianium, Inconel etc. * 4SURA, 4SUEA are specialized to cut Inconel. * Strong wear-resistance by adapting S-pro coating.

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.