• europages
  • >
  • 企业 - 供货商 - 服务商
  • >
  • 铣头

结果来自

铣头 - 進出口

德国

经Europages验证

铣刀包装箱, 坚固耐用,为高品质铣刀头提供全方位保护 中心固定旋钮有效地保护刀刃 坚固耐用的双层吹塑箱体 盖底设计便于安全叠放

请求报价

德国

经Europages验证

六角形可伸缩塑胶包装管。适用于钻头,铣刀,刀柄工具,刀架的包装方案 可伸缩调整长度 快速高效的包装 简单易操作

请求报价

德国

由于带内置轴承和定子联轴器的 RCN、RON和RPN系列角度编码器的静态 和动态精度高,它们是回转工作台和摆动 轴等高精度应用的首选测量工具。测量基 准是DIADUR光栅的圆光栅码盘—RPN为 相位光栅。采用定子联轴器的编码器精度 已包括联轴器产生的误差。如果是分离式 联轴器的角度编码器,在计算系统精度时 必须考虑连接误差。 RON 905 • 超高精度角度编码器 • 系统精度± 0.4" • 用于高精度测量设备和测量设备的检验角度编码器 海德汉公司的角度编码器精度高,可达角 秒级甚至更高。角度编码器应用于机床回 转工作台、机床摆动铣头、分度装置、高 精度角度测量工作台、角度计量、天线和 天文望远镜等精密设备上。 • 线数通常为9000至180 000线 • 精度± 5"至± 0.4" • 测量步距可达0.000 01°或0.036" (增量式)或29 bit,即每转约 53 600万个位置(绝对式) 内置轴承角度编码器和旋转编码器用分离 式联轴器连接,用于实心轴。这种推荐的 连接被测轴方式能补偿径向和轴向误差。 分离式联轴器的角度编码器支持的轴转速 更高。

请求报价

韩国

Workpiece: Glass Ceramic Type : Lithium Disilicate Flutes : 1F Coating : Diamond Crumb

请求报价

韩国

[Product Description] X-PRO series is for milling carbon steel, low alloy steel and cast iron. It is optimized for roughing by applying a new shape cutting edge for reducing cutting force and improving wear resistance. [Product Specification] Flat end mill : D3 ~ D16 (2Flute, 4Flute) Roughing end mill : D3 ~ D16 (3Flute, 4Flute) [Product Model] Flat : 2XPE, 4XPE, 4XREV, 4XPEV Roughing : 3XOE, 4XOE [Product Use] * X pro series is suitable for Roughing by chip breaker and to cut HRC below 50. * Strong wear-resistance by adapting X-pro coating. * Special design of cutting edge minimizes fracturing. * Excellent work surface by deep ship pocket.

请求报价

韩国

[Product Description] S-PRO series is mainly used for cutting difficult-to-cut materials such as stainless, titanium, nickel and hastelloy in the aerospace field. A deep chip evacuation space of the S-PRO helps to cut difficult-to-cut materials, which facilitates chip evacuation and provides excellent surface finish. [Product Specification] Flat end mill : D1 ~ D20 Ball end mill : D3 ~ D20 C/R end mill : D1 ~ D20 [Product Model] Flat : 4SUE, 4SUEA Ball : 4SUB C/R : 4SUR, 4SURA [Product Use] * The cutting edge type of S pro series is unequal flute and it is suitable for cutting difficult to cut materials like alloly steels, stainless steels, Titianium, Inconel etc. * 4SURA, 4SUEA are specialized to cut Inconel. * Strong wear-resistance by adapting S-pro coating.

请求报价

韩国

[Product Description] S-PRO series is mainly used for cutting difficult-to-cut materials such as stainless, titanium, nickel and hastelloy in the aerospace field. A deep chip evacuation space of the S-PRO helps to cut difficult-to-cut materials, which facilitates chip evacuation and provides excellent surface finish. [Product Specification] Flat end mill : D1 ~ D20 Ball end mill : D3 ~ D20 C/R end mill : D1 ~ D20 [Product Model] Flat : 4SUE, 4SUEA Ball : 4SUB C/R : 4SUR, 4SURA [Product Use] * The cutting edge type of S pro series is unequal flute and it is suitable for cutting difficult to cut materials like alloly steels, stainless steels, Titianium, Inconel etc. * 4SURA, 4SUEA are specialized to cut Inconel. * Strong wear-resistance by adapting S-pro coating.

请求报价

韩国

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design

请求报价

韩国

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design

请求报价

韩国

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design

请求报价

韩国

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

请求报价

韩国

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

请求报价

韩国

[Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating.

请求报价

韩国

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

请求报价

韩国

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

请求报价

韩国

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

请求报价

韩国

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

请求报价

您也贩卖或制造类似产品?

请上EUROPAGES注册,刊登您的产品

添加我的公司

韩国

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

请求报价

韩国

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

请求报价

韩国

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

请求报价

韩国

Workpiece: Glass Ceramic Type : Lithium Disilicate Flutes : 1F Coating : Diamond Crumb

请求报价

韩国

·铜、石墨及非金属材料加工 ·耐磨性及润滑性最大化的特殊涂层

请求报价

韩国

[Product Description] AL-PRO series end mill is optimized to cut Aluminium(AL60, AL 70 line). Various cutting length & total length, customized machining is possible. [Product Specification] Flat end mill : D0.5 ~ D25 (1Flute, 2Flute, 2Flute) [Product Model] Flat : 1ALE, 2ALE, 3ALE [Product Use] * End mills for Aluminum, Alloy, non-ferrous and non-metallic materials

请求报价

韩国

[Product Description] AL-PRO series end mill is optimized to cut Aluminium(AL60, AL 70 line). Various cutting length & total length, customized machining is possible. [Product Specification] Flat end mill : D0.5 ~ D25 (1Flute, 2Flute, 2Flute) [Product Model] Flat : 1ALE, 2ALE, 3ALE [Product Use] * End mills for Aluminum, Alloy, non-ferrous and non-metallic materials

请求报价