WADI heat 系列金属接头

The WADI rail cable gland made of nickel-plated brass is the perfect cable entry solution for railway and low temperature applications down to -60°C. Features: - large-area sealing protects the cable - integrated anchorage with high retention - wide sealing and clamping range - for cables from 3 to 53 mm - the inner sealing ring can be removed easily for larger cables - high UV, ozone and weather resistancy - halogen-free - temperature range -60 °C / +100 °C (dynamic) - protection grade IP 66 / IP67 / IP69 - material of sealing insert fulfils superior claims on fire protection according to UL 94 V-0 and EN 45545-2, R22: HL3 / R23: HL3 - with metric thread from M12 to M63

The WADI one cable gland made of nickel-plated brass is the perfect cable entry solution for demanding applications. Features: - large-area sealing protects the cable - integrated anchorage with high retention - wide sealing and clamping range - for cables from 3 to 53 mm - the inner sealing ring can be removed easily for larger cables - high UV, ozone and weather resistancy - temperature range -40 °C / +100 °C (dynamic) - protection grade IP 66 / IP68 - 10 bar (30 min.) / IP69 - material of sealing insert fulfils UL 94 HB - with metric thread from M12 to M63

The CLAMPING JAW cable gland made of nickel-plated brass is the cable entry solution for applications where increased anchorage is required. Features: - increased centrical anchorage - for cables from 5,5 to 45 mm - temperature range -30 °C / +100 °C - Protection grade IP54 - with metric or Pg-thread

The Cable Entry Plate KADP is used to insert and seal cables in enclosures, machines and control cabinets. It provides a high flexibility for varios applications. KADP is perfect in tight spaces, as several cables can be inserted into the plate. Due to the ideal placement of the close-fitting insertion points, a high packing density with a protection grade of IP66 is achieved. The installation of the KADP into the enclosure is time-saving, by simply snapping the plate in with a single click. The cables are simply plugged in and the job is done. The "pushout" membrane re-seales almost by itself after removing the cable.