冶金和钢铁—机器和设施 - 進出口

Weight: 3~20T Applicable device: mill parts Application: Cement, electricity, metallurgy, chemical and others Customizable: Yes Product Introduction Bearing chock plays an important role of fixing bearing and bearing weight. It is the core part of rolling bearing. Its main function is to support the whole bearing structure. Bearing chock works under low speed and heavy load for long time. So its reliability is the most important feature. To achieve this feature, it must require good quality of bearing chock.

In the metallurgical and melting fields, a ladle is a vessel used to transport high temperature metal or pour out molten metals. Usually it has three different types, for example, casting ladle, transfer ladle, treatment ladle. Ladles are normally rated by their working capacity rather than by their physical size. Casting ladle: a ladle used to pour molten metal into moulds to produce the casting. Transfer ladle: a ladle used to transfer a large amount of molten metal from one process to another. Typically a transfer ladle will be used to transfer molten metal from a primary melting furnace to either an holding furnace or an auto-pour unit. Treatment ladle: a ladle used for a process to take place within the ladle to change some aspect of the molten metal. A typical example being to convert cast iron to ductile iron by the addition of various elements into the ladle.

Slag pots are crucial items as they are part of lifting equipment and therefore undergo in terms of mechanical design engineering and handling the national safety regulations of the state where they are supposed to be operated. Thus, the following design criteria must be taken into consideration: Type of furnace that the slag pot will service, Quantity and type of slag generated, Method of handling and dumping the pot, Heat impact during operation, Dimensional restrictions, Pot maintenance procedures Slag pots designed by CSM comply with the requirements of structure dimensions, mechanical properties and guarantee by chemical composition, heat treatment, non-destructive testing and visual inspection against surface.

Crucibles are cast steel molds for the casting of aluminum ingot for remelt storage and/ or transportation. Dimensions and design can be customized to customer requirements, including the casting of customer’s logo, and additional of feet and/or lugs for material handling. INDUSTRIES : Cast houses; Remelter APPLICATIONS : Cast ingot Solid storage/ transportation Empty trough / furnace MATERIAL AVAILABLE : QT450-12/ASTM A536/65-45-12 Shanghai Special Metal Co., Ltd is a comprehensive and professional supporting supplier in industrial field which owns great production capacity, advanced management ability, splendid procedure control system and first rate service so that we can provide high quality products as well as service to the worldwide customers. In principle there are three sorts of materials available for the manufacture of crucibles: Grey Cast Iron, Spheroidal Graphite (S.G.) Iron and Cast Steel.

Aluminum electrolyzer is the main equipment of Cryolite- Aluminum Oxide mix in the fused salt solution in order to electrolysis the fine aluminum to get the aluminum ingot. Electrolytic aluminum anode steel claw/yoke is also called electrolysis claw/yoke. There are several types of claws, such as parallel three claws, four claws, stereoscopic four claws, six claws, eight claws, double anode steel claw etc. The steel claw is connected to the copper bar to consist of Anode. Material for the claw/yoke is an approved low carbon steel, which is similar the following standards: AS 2074-2003 Grade C2 AISI 1010, 1008 or 1006